Have Questions About A Machine?
Call Matt (678) 939-4136
Email: Sales@GlassMachineryLocator.com
Call Matt (678) 939-4136 or Email sales@GlassMachineryLocator.com Home | Advanced Search | Contact Us
  August 10, 2022
Glass Machinery

Machine ID 4814 Year 2011
Category Glass Machinery - Washing Machines Condition Good
Type 60" Horizontal Washer Region Midwest US
Manufacturer Somaca Sale Price $8950.00
Model TTW606    
Photo Slideshow
Description Somaca/CRL's 60" Horizontal Glass Washers have the latest design features. The six brush glass washing machine's processing speed has been increased up to 35 feet per minute. We can fabricate machines to process at any speed you need. The horizontal glass washers have a tilt-top design. The top will tilt from either end and can be supplied with an optional hydraulic lifting device. In fact, the top can be lifted straight off with an overhead crane. Access to the inside of the machine is important to perform maintenance on spray nozzles, or replace brushes.

Glass fabricators will be interested in the patented rapid height adjustment system. This option allows the machine operator to raise the upper section in one second from 1/4 to 1/2 inch (6.4 to 12.7 millimeter) glass. To adjust 1/2 to 3/4 inch (12.7 to 19.1 millimeter) glass also takes only one second.

The corrosion resistance of horizontal machines has been enhanced by adding stainless steel to the spray compartment walls and to the brush and roller journals. We also use non-corrosive re-circulating pumps, and have located all bearings outside the wet area.

To enhance the drying capability, the air blast drying system has been completely redesigned. As a result, glass can be loaded on the conveyor in a squared position, and dried. Some competitive washers require the glass be loaded on the conveyor in a diagonal position so the trailing edge can be dried.


Accepts glass in any shape with a single dimension of 5-1/2 inch (139.7 millimeter) from single strength to 1/4 inch (6.4 millimeter). Variable line speed is five to 35 feet (1.5 to 10.7 meters) per minute.


Brushes are 3-1/2 inch (88.9 millimeter) diameter by 37 inches (940 millimeters) long with spiral wound bristles. Brush height is adjustable and they are V-belt driven.

Drying System

Air blast drying system uses 10HP pressure blower. It pressurizes plant air and forces it through top and bottom blast tubes to dry both surfaces of the glass. The baffled enclosure covered drying system reduces noise.


Solid rubber covered conveyor feed and pinch rollers throughout machine.


Heavy duty, standard ball bearing units insure long life and are readily available for easy replacement.


Frame is a steel weldment, consisting of an entry conveyor section, main washing section, and an exit conveyor section. Tilt-top design for easy maintenance.


Control panel is built to NEMA 12 specifications to meet OSHA requirements. Every panel is UL approved. Power requirements are 3 phase, 60 cycle, 208/230/460 volt. International voltages are available on special order.


One spray pipe per brush applies the detergent solution or water. Threaded pipe plug ends allow easy cleaning. Water consumption without miser rinse is about 4.5 GPM.

Machine details were taken from manufacturers web site and are subject to verification.

Dealer/Seller Contact Information
Contact Matt Dombrowski, Product Manager
Company Selective Machinery, Inc.
Address 17434 Palamino Lake Dr
Dade City Florida 33523
Phone 678-939-4136
Email sales@GlassMachineryLocator.com

Related Machines (Glass Machinery - Washing Machines)
(4810) Billco - Washer - Curved Glass Washer and Dryer   (4795) 2018 Billco - Super EV60 4 - 60" Vertical Glass Washer
(4763) American - VGW60 - 60" Vertical Glass Washer   (4757) 2003 Quaranta - N/A - Horizontal Glass Washer
(4755) Billco - N/A - 48" Horizontal Washer   (4753) Jordan - LB 1800 - 71" Vertical Glass Washer
(4752) Vitrododi - 15 s - 60" Vertical Glass Washer   (4747) 2006 Benteler - tecLine - 96" Horizontal Washer
(4740) Somaca - TTW-366 - 36