Forvet Francesca CNC Mill. Machine was recently removed from service and in good working order. The FRANCESCA FC 1250 H.O. is a glass working Numerically Controlled (NC) drilling centre, capable of performing drilling, countersinking and milling operations on flat glass sheets, ranging in thickness from 3 to 25mm. including “out of square” pieces. The working field is as wide as 1250 mm. and length limits are according to the conveyor. The working cycle is completely automatic, so it does not require any manual intervention. The NC optimises the approaching speed of the heads, controls the glass transport feed, drilling speed and water quantity and adjusts the drill height to compensate for its wear. The operator is only required to set the hole diameter and its coordinates. X axis free (according to the conveyor size) Y axis max 1250 mm Minimum glass dimension 150x350mm (drilling) | 150x450mm (milling) Maximum Glass thickness from 3 to 19 mm (25 mm optional) Maximum drilling diameter 70 mm Number of spindles 16 (8+8)
|