Power: 208 Volts, 3 phase,80 Amps, 17KW
Comments: Used very little in small glass shop no high production.Needs new computer which will be included in the price
7 wheel NC bevelling machine, for the bevel processing and for the working of flat edge with rear arris of the glass remaining after removal. Also available in NC version which is designed for polished pencil edging of the glass remaining after removal.
The conveyor runs on bearing free steel lines so it can do continuous, straight and exceptionally accurate work. The numerical control expressly designed for this machine makes it extremely easy to use. The tools which Z.Bavelloni has developed specifically for this type of work allow the machine to combine high production speeds with very high quality output.
Workable thickness: from 3 to 20 mm.
Minimum workable height: 35 mm.
Minimum workable size: 40 x 40 mm.
Bevel inclination: from 3° to 45°
Max. bevel width: 50 mm.
Entry/exit arms with antifriction conveyor mechanism
Sliding conveyor on steel guides
Pneumatic pump for guide lubrication
Conveyor position electronic control system
Spindle automatic adjustment system for polishing wheel to compensate wheel wear
9 inch video numerical control
Closed circuit hydraulic wheel cooling system
Cerium system with shaker pump